Painters Advice On How To Paint New Timber
Before you start painting you will need to know what type of paint you wish to use. You are able to decide on oil or water based paint. Water based paints are becoming popular as individuals are seeking environmentally considerate paints. You should choose between matte, low sheen or gloss finishes.
Make sure your timber is dry ahead of painting to make certain your paint doesn't wrinkle or blister.
Work in a well ventilated area and wear a dust mask through the sand-papering stages.
Start off by sanding down the timber having an all-purpose 80 grit sand-paper. Another grade of paper is a 100 grit. If you're painting furniture check out employing a 150 grit sand-paper. If you are painting rough carpentry projects or seek a hard textured finish don't sand-paper the timber.
Make sure to use established well-known paint products created by paint manufacturers who've existed to prove the test of time.
Make sure that your timber is free from dust before painting to ensue good paint adhesion.
Check the timber for knots. Apply knot primer to all knots.
The very first coat you will need to connect with your surface is wood primer. If you determine to use oil based wood primer make sure that your proceeding coats or also oil based. You will need to use water based paint if your wood primer is water based. Don't use oil and water based paint on the same surface. Apply the primer by brush or roller with respect to the size of your surface. Clean water based paints with water and oil paints with mineral turpentine.
Once you have applied the primer enable the right drying time (as directed by the paint manufacturer).
Check for dents and chips at first glance of the wood. Fill with wood filler and allow to dry. Sand wood filler down to a smooth finish. Touch up wood filler with wood primer and allow to dry. Sand with 100 grit sand paper and remove dust.
The 2nd coat of paint is recognized as the undercoat. Non drip directory enamels do not require an undercoat.
Apply the undercoat by brush or roller depending on the size of one's surface. Sand paper lightly after correct drying time utilizing a 150 grit sandpaper.
The next coat of paint is known as the utmost effective coat. Use a foam roller in the event that you require a really smooth finish. Foam rollers may be used with water based in addition to oil based paint. Apply two coats of the most effective coat lightly sanding between coats. Don't sand the ultimate coat.
